| 超声波清洗机Ultrasonic Cleaning Machine主要由清洗槽ultrasonic vibration box和超声电源ultrasonic generator两部分组成，由电缆联结。对于槽式清洗机清洗槽的下面装有换能器；对于浸入式的超声波清洗机，换能器密封在不锈钢盒内。换能器将电源送来的电能转换为机械波，达到清洗的目的。The principle of ultrasonic cleaning is that the high frequency mechanical vibration yielded from high frequency electronic oscillating signal produced by the generator through energy transducer, and the high frequency mechanical vibration transmitted into the cleaning liquid, so as to actuate high efficient cleaning to objects in the liquid. 1超声波清洗槽ultrasonic vibration box：采用SUS304或316L不锈钢，也可根据具体清洗工艺要求选用特种不锈钢氩气保护焊接，必须保证绝对不漏水。 2换能器：采用特种锆酸钛铅压电陶瓷片及金属压块组合成的振头，具有效率高、寿命长、不易损坏等优点，粘接剂选用耐高温、耐振动、高强度的树脂胶以防脱落。 3 超声波发生器ultrasonic generator：电路结构完善，机箱面板装有电源开关，过载指示，电表等。可根据用户需求，配置数字定时器，加装数字功率指示器和功率调节电路。 http://www.lscsb.com | 